Presley Elite CoatingsJacksonville, Florida

Polyaspartic Garage Floor Coating in Jacksonville, FL

Presley Elite Coatings installs polyaspartic garage floor coating that cures fast, won't yellow in the Florida sun and stands up to hot tires.

Polyaspartic flake garage floor coating with a glossy topcoat, installed by Presley Elite Coatings of Jacksonville

Get your free estimate

What do you want coated?

Free in-home estimate. 15-year transferable warranty on qualifying installations.

Prefer to talk? Call (904) 200-2679

  • 1-day install on qualifying projects
  • 15-year transferable warranty on qualifying installs
  • Owner-installed locally owned in Jacksonville

It's what we install most: a polyurea base coat, full-broadcast flake if you want it, and a UV-stable polyaspartic topcoat over diamond-ground concrete. It cures fast, resists yellowing in the Florida sun and holds up to hot tires and oil far better than a DIY kit.

Every floor starts with diamond-ground preparation, and on qualifying projects you can park on it far sooner than with traditional epoxy.

You deal directly with the owner, Bryan Presley, from the first inspection to the final walkthrough. He'll tell you whether polyaspartic flooring suits your concrete and the way you use the space.

Why polyaspartic for a Florida garage?

Polyaspartic resists yellowing in direct sun, even with the garage door open all afternoon. Over a polyurea base it flexes as the slab heats and cools, resists hot-tire pickup and resists oil, salt air and humidity. That combination is exactly what a Florida garage puts a coating through.

1-day installation

Fast cure times mean qualifying projects are installed in one day.

UV-stable in Florida sun

Polyaspartic resists the yellowing and fading that traditional epoxy suffers in open Florida garages.

Hot tire & chemical resistant

Resists oil, gasoline and automotive fluids in normal use, and stands up to hot-tire pickup.

Seamless and easy to clean

No grout lines or seams; sweep, mop or hose it down.

Is polyaspartic better than epoxy?

For a Florida garage, yes, and it's the only system we install. Traditional epoxy cures slowly, can yellow in sunlight and is more likely to soften or lift under hot tires. A polyurea base with a polyaspartic topcoat cures faster, stays UV-stable and flexes with temperature swings. Here is how they compare.

Polyurea and polyaspartic compared with traditional epoxy
FeaturePolyurea + polyaspartic (what we install)Traditional epoxy
Return to serviceFast cure; many garages are finished in one daySlow cure; often several days before you can park
UV and yellowingUV-stable topcoat resists yellowing in sunlightProne to yellowing and fading in sunlight
Heat and hot tiresHandles Florida heat and resists hot-tire pickupMore prone to softening and hot-tire pickup
FlexibilityFlexes as the slab heats and coolsHarder and more brittle; can crack or peel
PrepDiamond-ground concrete on every floorVaries; DIY kits often rely on etching or cleaning
Warranty15-Year Transferable Warranty on qualifying installationsVaries by installer; DIY kits rarely include one

How does polyaspartic handle Florida heat, sun and humidity?

It suits conditions like ours. The polyaspartic topcoat is UV-stable, the polyurea base flexes with the heat, and the one-piece surface keeps humidity, salt and spills on top of the floor instead of soaking into the concrete. The weak point is usually preparation, which is why we never skip it.

Summer heat

The polyurea base flexes as the slab heats and cools, so the coating stays bonded through a Florida summer.

Sun and UV

A UV-stable polyaspartic topcoat resists the yellowing epoxy suffers when the garage door is open to the sun.

Humidity and moisture

Every slab is diamond ground and checked for moisture before coating, so humidity is far less likely to push the floor loose.

Hot-tire pickup

The cured system resists the lifting that hot tires cause on weaker coatings and DIY kits.

How long does polyaspartic last?

A properly installed polyaspartic floor is built to last for many years, and ours carry a 15-Year Transferable Warranty on qualifying installations. How long any coating lasts depends mostly on preparation, so we diamond grind every slab, repair cracks and check for moisture before a drop of coating goes down.

How much does a polyaspartic garage floor cost?

From $6.50 per square foot installed, with a $2,500 minimum project. A typical two-car garage of 400 to 480 square feet starts from about $2,600 to $3,120. Repairs or removing an old coating can add to that, and Bryan confirms your price in writing at a free in-home estimate.

  • 2-car garage

    400 to 480 sq ft

    From about$2,600 to $3,120

  • 3-car garage

    600 to 700 sq ft

    From about$3,900 to $4,550

Your final price depends on the condition of your concrete, such as crack and spall repairs or removing an old coating, and Bryan confirms it at your free in-home estimate.

How your floor is built

Five layers, put down in order. The two you never see, the slab repair and the diamond grinding, are the ones that decide whether the coating stays bonded.

  1. UV-stable polyaspartic topcoat

    A clear, glossy wear layer over the flake. UV-stable, which matters in a Florida garage that sits open to the sun.

  2. Full-broadcast flake

    Flake is broadcast to full coverage. It gives texture underfoot and comes in 23 named blends.

  3. Polyurea base coat

    Goes down on the freshly ground concrete, bonds to it and holds the flake in place.

  4. Diamond-ground profile

    Every floor is diamond ground to open up the surface so the coating can bond. This step is never skipped.

  5. Your concrete slab

    Cracks, pits and spalled spots are filled and ground flush, only where the floor actually needs it.

How is a polyaspartic garage floor coating installed?

Every polyaspartic garage floor coating goes down in the same five steps. Bryan inspects the slab, we diamond grind it, repair cracks and pits, roll on a polyurea base coat with full-broadcast flake if you chose it, then seal it with a UV-stable polyaspartic topcoat. Qualifying projects are installed in one day; Bryan confirms at the estimate whether yours qualifies.

  1. 1

    Inspect

    Bryan looks at your concrete in person, checks for cracks, moisture and old coatings, and explains exactly what your floor needs, and what it doesn't.

  2. 2

    Diamond grind

    Every floor is diamond ground to open up the concrete so the coating bonds properly. This step is never skipped.

  3. 3

    Repair

    Cracks, pits and spalled areas are filled and ground flush, only where the floor actually needs it.

  4. 4

    Base coat & flake

    A professional-grade polyurea base coat goes down, followed by decorative flake broadcast to full coverage on flake systems.

  5. 5

    Polyaspartic topcoat

    A UV-stable polyaspartic topcoat seals the system for a glossy, easy-to-clean finish.

15-Year Transferable Warranty on qualifying installations, covering defects in workmanship and coating-system failure. Read the full warranty

Polyaspartic garage floor questions

How much does polyaspartic flooring cost?

From $6.50 per square foot installed, with a $2,500 minimum project. A typical two-car garage of 400 to 480 square feet starts from about $2,600 to $3,120. It costs more than a DIY epoxy kit because you are paying for professional-grade materials, diamond grinding of the whole slab, crack and pit repairs, and a 15-Year Transferable Warranty on qualifying installations. Your final price depends on the condition of your concrete, such as crack and spall repairs or removing an old coating, and Bryan confirms it at your free in-home estimate.

Is polyaspartic worth the money?

For most Florida garages, yes. The topcoat is UV-stable, so it resists yellowing in the sun, and it resists the hot-tire pickup that ruins weaker coatings. It returns to service quickly, wipes clean with a mop, and carries a 15-Year Transferable Warranty on qualifying installations. A finished floor is also something buyers notice. The alternative is often a DIY coat that peels and has to be ground off and redone, which costs you twice.

What are the disadvantages of polyaspartic?

The main trade-offs are cost and installation. It costs more upfront than a DIY kit, and because it cures fast it has to be installed by an experienced installer, not by a first-timer with a roller. A smooth gloss finish can be slick when wet, which full-broadcast flake or added texture solves. And like any coating, it depends on proper preparation, which is why every floor we do is diamond ground first.

How soon can I drive on a polyaspartic floor?

Bryan confirms when you can walk on and park on your floor at the estimate, because cure time depends on temperature and humidity. Polyaspartic returns to service much sooner than traditional epoxy, which usually keeps a garage out of use for several days. Bryan tells you when to move your cars and belongings back in. Ask him about timing for your own slab at the estimate.

Is a polyurea garage floor coating the same as polyaspartic?

They're related, and our system uses both. The polyurea base coat bonds to ground concrete and flexes with the slab as it heats and cools. Polyaspartic is a UV-stable type of polyurea, which is why we use it as the topcoat. Together they make one system: a durable base with a clear, sun-resistant finish. Neither one is epoxy, and that difference is much of the reason these floors hold up in Florida.

Other services

All services
Grey flake garage floor coating with a coved edge along the wall

Garage Floor Coatings

Garage floor coatings that take bare or stained concrete to a showroom finish.

Garage floor coatings

Ready for a floor you're proud to show off?

Bryan will inspect your concrete, explain the preparation it needs and bring coating samples to your home.