Presley Elite CoatingsJacksonville, Florida

Concrete Coatings in Jacksonville, FL

Presley Elite Coatings installs concrete coatings in Jacksonville, FL from our base on the Southside, near Intracoastal West. When you call, you reach the owner, Bryan Presley, who does the estimate and the install himself, for garages, patios, pool decks and commercial floors from Mandarin and Arlington to Jacksonville Beach.

Polyaspartic flake garage floor coating, the system we install for Jacksonville, FL homes

Get your free estimate

What do you want coated?

Free in-home estimate. 15-year transferable warranty on qualifying installations.

Prefer to talk? Call (904) 200-2679

  • 1-day install on qualifying projects
  • 15-year transferable warranty on qualifying installs
  • Owner-installed locally owned in Jacksonville

Concrete coatings for Jacksonville, FL heat and humidity

Jacksonville summers are long and humid, with afternoon storms rolling through most weeks. Concrete draws moisture up from the ground, and a coating that can't cope with it tends to bubble, lift and peel. Afternoon sun through an open garage door can turn ordinary epoxy yellow over time, and tires that come home hot after a summer drive can pull a weak coating off the slab. Our answer is a flexible polyurea base under a UV-stable polyaspartic topcoat, laid over concrete that has been diamond ground and moisture checked first.

From Mandarin to the Beaches: where we work in Jacksonville

We work out of the Southside, so most of the city is close to home. That includes Mandarin along the St. Johns River, Arlington, San Marco, and the Beaches from Jacksonville Beach up to Atlantic and Neptune Beach, plus Nocatee and Ponte Vedra just over the county line. Homes near the ocean live with salt air, and cars carry salty grit and sand into the garage every day. Estimates run Monday to Friday, 9am to 5pm, and the person who measures your floor is the same person who coats it.

What Jacksonville garages and slabs usually need

Jacksonville has a wide mix of housing, from older homes with stained, cracked or previously coated slabs to newer builds with concrete in good shape. Where an old coating is peeling, we grind it off rather than cover it up. Cracks are repaired where they need it and left alone where they don't. Newer slabs get a moisture check before anything goes down. Bryan would rather talk you out of work you don't need than add it to the bill. Every floor is priced at the free in-home estimate, on what Bryan actually finds in your slab.

Diamond grinding a concrete garage floor before a polyurea base coat

How we install a Jacksonville floor

  1. 1

    Inspect

    Bryan looks at your concrete in person, checks for cracks, moisture and old coatings, and explains exactly what your floor needs, and what it doesn't.

  2. 2

    Diamond grind

    Every floor is diamond ground to open up the concrete so the coating bonds properly. This step is never skipped.

  3. 3

    Repair

    Cracks, pits and spalled areas are filled and ground flush, only where the floor actually needs it.

  4. 4

    Base coat & flake

    A professional-grade polyurea base coat goes down, followed by decorative flake broadcast to full coverage on flake systems.

  5. 5

    Polyaspartic topcoat

    A UV-stable polyaspartic topcoat seals the system for a glossy, easy-to-clean finish.

15-Year Transferable Warranty on qualifying installations, covering defects in workmanship and coating-system failure. Read the full warranty

The layers under a Jacksonville floor

Five layers, put down in order. The two you never see, the slab repair and the diamond grinding, are the ones that decide whether the coating stays bonded.

Read how the system is installed
  1. UV-stable polyaspartic topcoat

  2. Full-broadcast flake

  3. Polyurea base coat

  4. Diamond-ground profile

  5. Your concrete slab

Coating services for Jacksonville homes and businesses

All services
Grey flake garage floor coating with a coved edge along the wall

Garage Floor Coatings in Jacksonville

Garage floor coatings that take bare or stained concrete to a showroom finish.

Garage floor coatings
Garage floor with a custom flake blend and polyaspartic topcoat

Polyaspartic Garage Floor Coatings in Jacksonville

Fast-curing, UV-stable polyaspartic systems, our specialty, often installed in one day.

Polyaspartic garage floors
Close-up of a full-broadcast flake garage floor

Flake / Chip Floor Systems in Jacksonville

Decorative full-broadcast flake floors with texture, color and serious durability.

Epoxy-style flake garage floors

Jacksonville neighborhoods and nearby areas we cover

  • Southside
  • Intracoastal West
  • Arlington
  • Mandarin
  • San Marco
  • Nocatee & Ponte Vedra
  • Jacksonville Beach
  • Atlantic & Neptune Beach
  • Fleming Island
  • Oakleaf

Planning a garage? See starting prices, how our system compares with epoxy and how a one-day install works.

Garage floor coatings: pricing and the 1-day install

Jacksonville concrete coating questions

Straight answers before you book. Anything else, call Bryan on (904) 200-2679.

How much does a garage floor coating cost in Jacksonville?

It depends on the size of the garage and the condition of the slab, so Bryan prices every floor at a free in-home estimate. Garage floors are priced by the square foot, and our garage floor coating page sets out typical starting prices for two- and three-car garages. Your final price depends on the condition of your concrete, such as crack and spall repairs or removing an old coating, and Bryan confirms it at your free in-home estimate. The estimate is free and happens at your home anywhere in Jacksonville, and Bryan brings flake samples so you can choose a finish while he measures.

Do you work near the ocean in Jacksonville Beach and Atlantic Beach?

Yes. Jacksonville Beach, Atlantic Beach and Neptune Beach are all within our area. Garages close to the ocean deal with salt air, humidity and sand that rides in on tires and shoes. A coated floor seals the top of the concrete, so salt and sand sit on the surface instead of soaking into the slab, and they rinse off with a hose and a mild cleaner. Prep at the Beaches is the same as anywhere else in town: a moisture check and full diamond grinding before the base coat goes down.

Can you coat my newer Jacksonville slab?

Yes, once it has cured enough. New concrete holds a lot of water while it cures, and coating it too soon can trap that moisture under the floor. Bryan checks the slab's moisture at the estimate and tells you whether it is ready now or should wait a while longer. When it is ready, a new slab is still diamond ground like any other, because grinding opens up the smooth top layer so the polyurea base can bond into the concrete rather than sit on top of it.

How do I book an estimate in Jacksonville?

Call Bryan or request one online. The number is (904) 200-2679, and estimates are booked Monday to Friday, 9am to 5pm. The estimate is free and takes place at your home: Bryan measures the area, looks closely at the concrete, brings physical samples and talks through what the floor actually needs. You get a clear price based on what he sees, with no pressure to add work that won't make a difference to how your floor performs.

Request a floor coating estimate in Jacksonville

Bryan will inspect your concrete, explain the preparation it needs and bring coating samples to your home.