
Polyaspartic Garage Floor Coatings
Fast-curing, UV-stable polyaspartic systems, our specialty, often installed in one day.
Polyaspartic garage floorsPresley Elite Coatings turns bare, stained or peeling concrete into a seamless garage floor coating that's easy to clean, with 1-day installs on qualifying projects.

Free in-home estimate. 15-year transferable warranty on qualifying installations.
Prefer to talk? Call (904) 200-2679
Looking for garage floor coating near you in Northeast Florida? Every floor gets a polyurea base and polyaspartic topcoat over diamond-ground concrete, and you deal directly with the owner, Bryan Presley, from estimate to finished floor.
Your garage is often the biggest single slab of concrete in your home, and in Florida it takes a beating from heat, humidity, hot tires and spills. A professional coating protects that concrete and makes the whole space look finished.
Unlike DIY kits or quick paint-on jobs, our coatings bond to properly prepared concrete and are backed by a 15-Year Transferable Warranty on qualifying installations. If you're weighing the best garage floor coating for your home, Bryan will walk you through the options at a free estimate.
A bare garage slab soaks up oil, stains easily, sheds dust and looks unfinished. A professional coating seals it, brightens the whole space and wipes clean in minutes. Unlike DIY kits, which often peel, ours bond to diamond-ground concrete, and qualifying installations are backed by our 15-Year Transferable Warranty, which can go with the house when you sell.
Seals the slab against oil, chemicals, moisture staining and wear.
A glossy coated floor reflects light and makes the space feel like part of the home.
A finished garage floor is something buyers notice, and the 15-Year Transferable Warranty on qualifying installations can go with the house.
Bryan explains the preparation your concrete needs and recommends the right finish for your space.
For Florida homes, the best garage floor coating is a polyurea base with a UV-stable polyaspartic topcoat over diamond-ground concrete. It cures faster than traditional epoxy, resists yellowing and hot-tire pickup, and flexes with the heat. Epoxy can look similar on day one; the difference shows up after a few Florida summers.
| Feature | Polyurea + polyaspartic (what we install) | Traditional epoxy |
|---|---|---|
| Return to service | Fast cure; many garages are finished in one day | Slow cure; often several days before you can park |
| UV and yellowing | UV-stable topcoat resists yellowing in sunlight | Prone to yellowing and fading in sunlight |
| Heat and hot tires | Handles Florida heat and resists hot-tire pickup | More prone to softening and hot-tire pickup |
| Flexibility | Flexes as the slab heats and cools | Harder and more brittle; can crack or peel |
| Prep | Diamond-ground concrete on every floor | Varies; DIY kits often rely on etching or cleaning |
| Warranty | 15-Year Transferable Warranty on qualifying installations | Varies by installer; DIY kits rarely include one |
Heat, sun and humidity work on a garage floor every day. Hot tires soften weak coatings, afternoon sun can yellow epoxy, and moisture in the slab pushes poorly bonded coatings loose. Our system is UV-stable and flexible, and every floor is diamond ground and moisture checked so the coating stays bonded.
The polyurea base flexes as the slab heats and cools, so the coating stays bonded through a Florida summer.
A UV-stable polyaspartic topcoat resists the yellowing epoxy suffers when the garage door is open to the sun.
Every slab is diamond ground and checked for moisture before coating, so humidity is far less likely to push the floor loose.
The cured system resists the lifting that hot tires cause on weaker coatings and DIY kits.
Yes, on qualifying projects. Fast-curing polyurea and polyaspartic let us grind, repair, coat and topcoat in a single visit, so you are not without your garage for days. Qualifying projects are installed in one day; Bryan confirms at the estimate whether yours qualifies.
Not quite. Resurfacing usually means pouring a new cement-based overlay, while a coating bonds a polyurea and polyaspartic system to your existing slab. For most garages with sound concrete, diamond grinding, repairing cracks and coating gives the fresh, finished floor people want from resurfacing, without adding a new layer of cement.
From $6.50 per square foot installed, with a $2,500 minimum project. A typical two-car garage of 400 to 480 square feet starts from about $2,600 to $3,120. A typical three-car garage of 600 to 700 square feet starts from about $3,900 to $4,550. Bryan confirms the final price at your free in-home estimate.
400 to 480 sq ft
From about$2,600 to $3,120
600 to 700 sq ft
From about$3,900 to $4,550
Your final price depends on the condition of your concrete, such as crack and spall repairs or removing an old coating, and Bryan confirms it at your free in-home estimate.
Five layers, put down in order. The two you never see, the slab repair and the diamond grinding, are the ones that decide whether the coating stays bonded.
Read how the system is installedA clear, glossy wear layer over the flake. UV-stable, which matters in a Florida garage that sits open to the sun.
Flake is broadcast to full coverage. It gives texture underfoot and comes in 23 named blends.
Goes down on the freshly ground concrete, bonds to it and holds the flake in place.
Every floor is diamond ground to open up the surface so the coating can bond. This step is never skipped.
Cracks, pits and spalled spots are filled and ground flush, only where the floor actually needs it.
Every garage floor coating follows the same five steps: an in-person inspection, diamond grinding to open the concrete, crack and pit repairs where the slab needs them, a polyurea base coat with full-broadcast flake if you want it, and a UV-stable polyaspartic topcoat that seals the whole floor.
Bryan looks at your concrete in person, checks for cracks, moisture and old coatings, and explains exactly what your floor needs, and what it doesn't.
Every floor is diamond ground to open up the concrete so the coating bonds properly. This step is never skipped.
Cracks, pits and spalled areas are filled and ground flush, only where the floor actually needs it.
A professional-grade polyurea base coat goes down, followed by decorative flake broadcast to full coverage on flake systems.
A UV-stable polyaspartic topcoat seals the system for a glossy, easy-to-clean finish.
15-Year Transferable Warranty on qualifying installations, covering defects in workmanship and coating-system failure. Read the full warranty
Yes, once the slab has cured enough. Bryan checks moisture in a newer slab before anything is coated, because trapped moisture can push a coating loose. New concrete is still diamond ground so the coating bonds properly. He tells you when your slab is ready, and will say so plainly if it needs more time before he can install the coating.
Usually not. Cracks and pits are filled and ground flush before any coating goes down, and full-broadcast flake disguises the repaired areas. One caution: cracks caused by the slab itself moving can come back over time, because no coating can stop concrete from shifting. That is why structural movement is excluded from the warranty, and why Bryan looks at the cause of a crack at the estimate, not just the crack.
Yes, the floor needs to be completely clear. Grinding and coating cover the whole slab, so nothing can stay on it. Bryan confirms at the estimate what has to move, and it helps to plan where your cars and storage will go while we work. Bryan confirms when you can walk on and park on your floor at the estimate, because cure time depends on temperature and humidity.
In most cases, yes. Diamond grinding removes surface contamination, which is why oil spots rarely stop a coating from bonding. Deep, soaked-in oil may need extra cleaning first so it doesn't interfere with the base coat. Bryan inspects the floor in person and prices it on the actual condition of your concrete, so you only pay for the preparation your floor genuinely needs.

Fast-curing, UV-stable polyaspartic systems, our specialty, often installed in one day.
Polyaspartic garage floors
Decorative full-broadcast flake floors with texture, color and serious durability.
Epoxy-style flake garage floors
Durable coatings for Florida driveways, lanais, patios and pool decks.
Patio, pool deck and driveway coatings
Hard-wearing coatings for retail, showrooms, shops, warehouses and industrial spaces.
Commercial and industrial floor coatingsReal floors from around Jacksonville and Northeast Florida. Drag the slider to compare.


















Bryan will inspect your concrete, explain the preparation it needs and bring coating samples to your home.