
Garage Floor Coatings
Garage floor coatings that take bare or stained concrete to a showroom finish.
Garage floor coatingsMost people call these epoxy garage floors. Ours look the part but are built with polyurea and polyaspartic, which handle Florida heat and sun better than epoxy.

Free in-home estimate. 15-year transferable warranty on qualifying installations.
Prefer to talk? Call (904) 200-2679
You get the same look: a colored base coat, decorative flake broadcast edge to edge and a glossy clear topcoat, with a polyurea base and a UV-stable polyaspartic topcoat underneath.
If you've been searching for epoxy flooring in Jacksonville, this is the floor you've been picturing, sometimes called an epoxy flake floor or chip floor. Decorative flake is broadcast to full coverage, so the finish hides dust and small imperfections and adds texture underfoot.
We use professional-grade materials and diamond-ground preparation on every flake floor, so the coating bonds to your concrete instead of sitting on top of it. That preparation, as much as the polyurea and polyaspartic system itself, is what keeps our floors bonded where so many epoxy coatings peel.
You get the classic speckled garage floor most people call epoxy, with decorative flake broadcast edge to edge for rich color, texture underfoot and a finish that hides dust and tire marks. The difference is underneath: a polyurea base and polyaspartic topcoat that stand up to Florida sun and heat.
Flakes cover the entire base coat for a consistent, rich finish, not a sparse sprinkle.
The multi-tone texture disguises dust, tire marks and small concrete flaws.
The flake texture gives more grip than a smooth, plain coating.
Samples are brought to your home so you can choose a blend that suits your space.
For most Florida garages, a polyurea base coat with a polyaspartic topcoat is better than epoxy. It cures much faster, resists yellowing in sunlight, handles hot tires and temperature swings, and bonds well to properly ground concrete. It costs more than a DIY kit, but it is built to last through Florida summers.
| Feature | Polyurea + polyaspartic (what we install) | Traditional epoxy |
|---|---|---|
| Return to service | Fast cure; many garages are finished in one day | Slow cure; often several days before you can park |
| UV and yellowing | UV-stable topcoat resists yellowing in sunlight | Prone to yellowing and fading in sunlight |
| Heat and hot tires | Handles Florida heat and resists hot-tire pickup | More prone to softening and hot-tire pickup |
| Flexibility | Flexes as the slab heats and cools | Harder and more brittle; can crack or peel |
| Prep | Diamond-ground concrete on every floor | Varies; DIY kits often rely on etching or cleaning |
| Warranty | 15-Year Transferable Warranty on qualifying installations | Varies by installer; DIY kits rarely include one |
Florida is hard on epoxy. Afternoon sun through an open garage door can yellow it, summer heat and hot tires can soften it, and moisture in the slab can push it loose when prep is rushed. Our flake floors use a UV-stable polyaspartic topcoat and flexible polyurea base for those conditions, over diamond-ground concrete.
The polyurea base flexes as the slab heats and cools, so the coating stays bonded through a Florida summer.
A UV-stable polyaspartic topcoat resists the yellowing epoxy suffers when the garage door is open to the sun.
Every slab is diamond ground and checked for moisture before coating, so humidity is far less likely to push the floor loose.
The cured system resists the lifting that hot tires cause on weaker coatings and DIY kits.
Explore the flake blends Bryan works with. He brings physical samples to your estimate so you can see them in your space. Screen colors may vary from the actual finish.























Traditional epoxy cures slowly, so the garage is out of use for days. It can yellow and fade in sunlight, soften and lift under hot tires, and crack or peel as the slab moves with Florida heat. Thin DIY kits add weak bonding on top of those problems.
From $6.50 per square foot installed, with a $2,500 minimum project. A typical two-car garage of 400 to 480 square feet starts from about $2,600 to $3,120. Every flake floor gets full-broadcast coverage and a clear polyaspartic topcoat, and Bryan confirms your price at a free estimate.
400 to 480 sq ft
From about$2,600 to $3,120
600 to 700 sq ft
From about$3,900 to $4,550
Your final price depends on the condition of your concrete, such as crack and spall repairs or removing an old coating, and Bryan confirms it at your free in-home estimate.
Five layers, put down in order. The two you never see, the slab repair and the diamond grinding, are the ones that decide whether the coating stays bonded.
Read how the system is installedA clear, glossy wear layer over the flake. UV-stable, which matters in a Florida garage that sits open to the sun.
Flake is broadcast to full coverage. It gives texture underfoot and comes in 23 named blends.
Goes down on the freshly ground concrete, bonds to it and holds the flake in place.
Every floor is diamond ground to open up the surface so the coating can bond. This step is never skipped.
Cracks, pits and spalled spots are filled and ground flush, only where the floor actually needs it.
A flake garage floor goes down in five steps. Bryan inspects the slab, we diamond grind it, repair cracks and pits, roll on a polyurea base coat and broadcast decorative flake to full coverage, then seal everything under a clear, UV-stable polyaspartic topcoat. Qualifying projects are installed in one day; Bryan confirms at the estimate whether yours qualifies.
Bryan looks at your concrete in person, checks for cracks, moisture and old coatings, and explains exactly what your floor needs, and what it doesn't.
Every floor is diamond ground to open up the concrete so the coating bonds properly. This step is never skipped.
Cracks, pits and spalled areas are filled and ground flush, only where the floor actually needs it.
A professional-grade polyurea base coat goes down, followed by decorative flake broadcast to full coverage on flake systems.
A UV-stable polyaspartic topcoat seals the system for a glossy, easy-to-clean finish.
15-Year Transferable Warranty on qualifying installations, covering defects in workmanship and coating-system failure. Read the full warranty
It looks the same, but ours isn't epoxy. Many people call any flake garage floor an epoxy floor, and the finish is similar: color flake broadcast over a base coat and sealed under a glossy clear coat. Ours is a polyurea base, full-broadcast decorative flake and a polyaspartic topcoat. That matters in Florida, because the topcoat is UV-stable, it cures much faster than epoxy, and the base flexes as the slab heats and cools.
No. Presley Elite Coatings only installs polyurea and polyaspartic systems. We chose them because they cure faster, resist yellowing in Florida sun and flex with the slab as it heats and cools, which suits garages here better than epoxy does. If you have already been quoted for epoxy, Bryan will compare that quote with our system at the free estimate and explain the differences in plain terms, so you can decide with the full picture.
Yes. Bryan brings physical samples to your free estimate, so you can hold each blend against your own walls, doors and lighting. This page shows 23 blends you can browse beforehand. Colors on a screen can differ from the real finish, which is why we recommend choosing from the samples in person. If you are torn between two blends, Bryan can talk through how each will look across a full garage floor.
Better than any plain coating. The multi-tone flake disguises dust, tire marks and small concrete flaws far better than a solid color, which shows every footprint and scuff. It still needs regular sweeping and an occasional mop to look its best. Lighter and darker blends hide different things, so Bryan can advise on which suits your garage and how you use it before you commit to a color.

Garage floor coatings that take bare or stained concrete to a showroom finish.
Garage floor coatings
Fast-curing, UV-stable polyaspartic systems, our specialty, often installed in one day.
Polyaspartic garage floors
Durable coatings for Florida driveways, lanais, patios and pool decks.
Patio, pool deck and driveway coatings
Hard-wearing coatings for retail, showrooms, shops, warehouses and industrial spaces.
Commercial and industrial floor coatingsBryan will inspect your concrete, explain the preparation it needs and bring coating samples to your home.